发布时间:2019-08-08 19:09 原文链接: TwoDimensionalGelElectrophoreticAnalysisfortheHumanPlasmaProteome

Overview

This protocol is a detail description of the laboratory procedure in performing 2D gel electrophoresis for illustrating the protein profile of the human plasma proteome. 


Material

1.Peripheral whole blood.
2.Centrifuge machine
3.Spectrophotometer
4.Sample solubilization solution:
(1).25.5 g urea + 50 ml distilled H2O
(2).0.385 g DTT
(3).2 ml NP-40
(4).250 l carrier ampholyte (pH 3  10)
(5).Trace amount Bromophenol blue
5.IPG strip 
6.Mineral oil
7.Rehydration & IEF unit(BioRad)
8.Equilibration buffer:
(1).Tris (pH: 8.8; 50 mM): 0.335 ml
(2).Urea: 3.604 g
(3).Glycerol: 3.15 ml
(4).SDS: 0.2 g
(5).Bromophenol blue (trace)
(6).Make up to 10 ml with distilled H2O
9.100 mg DTT (Dithiothreitol)
10.250 mg IAA (Iodoacetamide)
11.Running buffer:
(1).Tris (ultrapure) 30.285 g
(2).SDS 144.134 g
(3).Glycine (ultrapure) 10 g
(4).Make up to 1000 ml with distilled H2O 
12.Polyacrylamide gel:
(1).Distilled H2O: 24.7 ml
(2).30% acrylamide: 22.1 ml
(3).1.5 M Tris (pH: 8.8): 16.9 ml
(4).10% SDS: 0.65 ml
(5).10% ammonium persulfate: 0.65 ml
(6).TEMED: 0.026 ml
13.0.5% agarose gel
14.Protein marker (BioRad)
15.The vertical SDS-PAGE unit(BioRad)
16.The glass staining basin
17.The fixation solution:
(1).100 ml Ethanol
(2).25 ml Acetic acid glacial
(3).Make up to 250 ml with distilled H2O
18.The sensitizing solution:
(1).75 ml Ethanol
(2).1.25 ml Glutardialdehyde (25% w/v)
(3).10 ml Sodium thiosulphate (5% w/v)
(4).17 g Sodium acetate
(5).Make up to 250 ml with distilled H2O
(6).Distilled water
19.The developing solution:
(1).6.25 g Sodium carbonate
(2).0.05 ml Formaldehyde (37% w/v)
(3).Make up to 250 ml with distilled H2O
20.The stopping solution:
(1).3.65 g EDTA-Na2 2 H2O
(2).Make up to 250 with distilled H2O
 


Procedure

1.The peripheral whole blood sample is collected in heparin tube.
2.Record the patientsˇ name, chart no., and tube no.
3.Centrifuge at 4 3000 rpm for 10 minutes.
4.Estimation of protein concentration by spectrophotometry i.e. checking OD595
(1).Mix the followings:
200l of BSA (Protein Assay Solution)
20l sample of human plasma
798 l H2O
(2).Blank solution:
200l of BSA (Protein Assay Solution)
800l H2O
From the ¨O.D. vs Concentration〃 graph we can estimate the concentration of protein in the human plasma (x mg / 1 ml)
5.Volume of protein sample recruited:
The amount of protein sample required for silver stain is 300g
By this calculation: x mg / 1 ml = 300g / y l
y l of the sample of human plasma is to be recruited in terms of its volume
6.Weigh 38 mg DTT and place it in the eppendorf tube. (Mix the sample and DTT first, and then add the buffer solution.)
7.Add buffer solutions to the sample.
Ingredients of the sample solubilization solution:
(1).25.5 g urea + 50 ml distilled H2O
(2).0.385 g DTT
(3).2 ml NP-40
(4).250 l carrier ampholyte (pH 3  10)
(5).Trace amount Bromophenol blue
The amount of sample buffer required = 300 l - y l (protein sample) = z l
8.Load this mixture to the strip tray.
9.Place the IPG (immobilized pH gradient) strip into the reswelling tray with gel-surface facing downward.
10.Add wicks soaked with buffer solution on both electrodes to minimize the interfering effects of salts in the solution.
11.Cover the strip with 1 ml mineral oil to prevent evaporation & urea crystallization
12.Cover the reswelling tray with its lid and set the program for rehydration and IEF.
Step 1: 250 volts, 15 min
Step 2: 10000 volts, 3 hours
Step 3: 60000 volts, 6 hours
Step 4: 500 volts, hold
*Duration: 12 hours
13.Harvest the IPG strip.
14.Rinse the IPG strip to remove the mineral oil.
15.Equilibration
*1st Equilibration: (Soak the IPG strip in 5 ml of this equilibration solution for 30 minutes with shaking)
10 ml SDS equilibration buffer + 100 mg DTT (Dithiothreitol)
*2nd Equilibration: (Soak the IPG strip in 5 ml of this equilibration solution for 30 minutes with shaking)
10 ml SDS equilibration buffer + 250 mg IAA (Iodoacetamide)
*Equilibration buffer:
(1).Tris (pH: 8.8; 50 mM): 0.335 ml
(2).Urea: 3.604 g
(3).Glycerol: 3.15 ml
(4).SDS: 0.2 g
(5).Bromophenol blue (trace amount)
(6).Make up to 10 ml with distilled H2O
16.Meanwhile prepare the polyacrylamide gel:
(1).Distilled H2O: 24.7 ml
(2).30% acrylamide: 22.1 ml
(3).1.5 M Tris (pH: 8.8): 16.9 ml
(4).10% SDS: 0.65 ml
(5).10% ammonium persulfate: 0.65 ml
(6).TEMED: 0.026 ml
17.Add running buffer on the top edge of the polyacrylamide gel
18.After equilibration, the IPG strip is placed horizontally on top of the polyacrylamide gel
19.Cover the top edge with 0.5% agarose gel, and create a marker well on top of the gel
20.Load protein marker into the marker well.
21.Place the polyacrylamide gel set into the vertical SDS-PAGE tank.
22.Fill it with sufficient running buffer.
23.Cover the lid of the vertical SDS-PAGE tank.
24.Switch on the power supply.
*Running conditions of 2D PAGE:
(1).Current: 40 mA/gel
(2).Voltage: 100 volts
(3).Temperature: 8 -12C (keep the system cool inside the refrigerator)
(4).Duration: 6 hours
25.Harvest the polyacrylamide gel.
26.Place it into the staining basin.
27.The silver staining procedure:
(1).Fixation
(2).Sensitizing
(3).Washing
(4).Silver reaction
(5).Washing
(6).Developing
(7).Stopping
28.Fixation
(1).100 ml Ethanol
(2).25 ml Acetic acid glacial
(3).Make up to 250 ml with distilled H2O
(4).Action time: 30 minutes
29.Sensitizing
(1).75 ml Ethanol
(2).1.25 ml Glutardialdehyde (25% w/v)
(3).10 ml Sodium thiosulphate (5% w/v)
(4).17 g Sodium acetate
(5).Make up to 250 ml with distilled H2O
(6).Action time: 30 minutes
30.Washing
(1).Distilled H2O
(2).3 times
(3).Each for 5 minutes
31.Silver reaction
(1).25 ml Silver nitrate solution (2.5% w/v)
(2).Formaldehyde (37% w/v)
(3).Action time: 20 minutes
32.Washing
(1).Distilled H2O
(2).2 times
(3).Each for 1 minute
33.Developing
(1).6.25 g Sodium carbonate
(2).0.05 ml Formaldehyde (37% w/v)
(3).Make up to 250 ml with distilled H2O
(4).Stir vigorously to dissolve sodium carbonate
(5).Action time: 2  5 minutes
34.Stopping
(1).3.65 g EDTA-Na22 H2O
(2).Make up to 250 with distilled H2O
(3).Action time: 10 minutes
35.Scan and file the results.
36.Identify the proteins by means of specific software.
 


Troubleshooting

1.Make sure the rehydration tray is placed horizontally.
2.Bubble-formation should be avoided when loading the strip into the tray.
3.The IPG strip should be stored under -20, and should not be exposed to room temperature longer that 10 minutes.
4.Make sure there is no leakage of water from the vertical glass plates before loading polyacrylamide gel solution.



相关文章

中国期刊“黑神话”,比肩NCS!影响因子高达33.2

日前,国产期刊TheInnovation获得首个影响因子(IF=32.1),成为科睿唯安JCR综合性期刊分类下排名仅次于《自然》(IF=64.8)和《科学》(IF=56.9)的期刊,并且这本期刊在目前......

190亿!赛默飞收购欧洲IVD巨头

近日,服务科学领域的全球领导者赛默飞世尔科技(以下简称赛默飞)宣布,在达成收购意向两个月之后,赛默飞以28亿美元、折合人民币约190亿元的价格,完成了对TheBindingSiteGroup的全现金收......

施普林格·自然与TheLens达成合作

11月15日,施普林格·自然和TheLens平台宣布结成重要的合作伙伴关系,以更深入地揭示学术研究和数据如何能通过经济和社会成效,加速推动创新的问题解决方式。通过将科学、投资和企业领域的开放数据更好地......

连看三大世界大学排名榜我国哪所大学是排名的“宠儿”?

6月10日,QS教育集团正式发布了2021年世界大学排名,中国共有83所高校上榜,包括内地高校51所,港澳台地区高校32所。中国大学的总体排名情况已经连续数年呈上升趋势,今年再度刷新了榜单。大学排名,......

HumanReproduction:男性睾丸组织衣原体感染会影响生育

近日,昆士兰科技大学(QUT)领导的一项研究强调了衣原体感染对男性生育能力的潜在影响。该研究首次在不育男性睾丸组织活检中发现了衣原体的存在。研究人员还在18位志愿者的血液中发现了12种针对沙眼衣原体细......

ThePlantCell:茉莉酸信号转录调控机理研究取得进展

作为一种重要的植物激素,茉莉酸不仅调控植物对于机械损伤、昆虫取食和腐生型病原菌侵害的防御反应,还参与调控诸多生长发育过程。basicHelix-Loop-Helix(bHLH)类型转录因子MYC2是茉......

李家洋应邀在PLANTCELL撰写ReflectionsonPlantCellClassics文章

ThePlantCell是植物领域的著名学术期刊,对植物学的发展起到了重要的引领作用。为庆祝创刊30周年,ThePlantCell杂志社邀请部分编委会成员及其他科学家对发表在该杂志的重要研究工作进行评......

珀金埃尔默推出FTNIR新品SpectrumTwoN

分析测试百科网讯近日,珀金埃尔默推出近红外新品SpectrumTwoNFT-NIR。该仪器专为实验室技术人员和工作人员进行广泛的制药,食品和工业样品的分子光谱分析。SpectrumTwoNSpectr......

HumanLongevity收购CypherGenomics

当地时间11月30日,科学狂人文特尔(J.CraigVenter)创办的世界上最大的DNA测序实验室HumanLongevity公司宣布收购生物标志物开发企业CypherGenomics,具体的财务细......

德国明斯特大学Hipper教授到水生所交流

 Hipper教授作学术报告9月25日,德国明斯特大学的MichaelHipper教授到中国科学院水生生物研究所进行学术交流,并为科研人员和研究生作了题为《环境胁迫下藻类光合作用的调节——莱......